女装裁剪图1.pdf

PATTERN How to lengthen and shorten pattern pieces: 1 Front piece 1x Cut the pattern pieces along the marked lines. To lengthen, slide the two halves of the pattern piece 2 Back piece 1x as far apart as necessary. To shorten, overlap the two halves of the pattern 3 Sleeves 2x piece as far as necessary. Even out the side edges. 4 Sleeve cuffs 2x CUTTING OUT 5 Collar 1x FOLD (––––) means: here is the center of a pattern piece but never a cut edge or a seam. The piece Paper cut for ANSI A (German DIN A4) prints: should be cut double, with the fold line forming the The patterns are printed out on 35 sheets with a thin centre line. Pattern pieces that are outlined with a frame. Wait, until all sheets are printed out. Arrange broken line in the cutting diagrams are to be placed the sheets so that they fit together (see extra page face down on the fabric. The cutting diagrams on the with the overview of the prints). Cut off the single pattern sheet show how the pattern pieces should be sheets on the upper and right edge along the thin placed on the fabric. frame lines. Begin with the left lower sheet and th