毕业论文外文翻译-电梯安全系统模拟器的设计和评价电梯安全系统.docVIP

本科毕业设计（论文） 外文参考文献译文及原文 学 院 机械工程学院 专 业 机械设计制造及其自动化 年级班别 学 号 学生姓名 指导教师 2014 年 5月 1 日 目 录 外文参考文献原文 1.INTRODUCTION 3 2.OUTLINE OF SAFETY SYSTEM 3 3.SIMULATION MODEL 4 4.EXPERIMENTS 6 5.CONCLUSION 6 电梯安全系统模拟器的设计和评价电梯安全系统 7 1.引言 7 2.外形安全系统 8 3.仿真模型 9 4.实验 12 5.仿真模型 13 A Simulator for the Design and Evaluation of Elevator Safety Systems ABSTRACT We developed a simulator to evaluate the safety of elevator. This simulator includes a dynamic model with a normal state and some abnormal states and a safety logic model. These models are described with a state transition model. This report outlines this simulator, and we show its effectiveness by comparing the simulators results with experimental results. KEY WORDS Safety System, Elevator, Simulator, State Transition Model 1. INTRODUCTION We developed a simulator to evaluate safety of an elevator. There are some simulators which simulate the dynamics of an elevator [1] [2]. These have a model that shows when the elevator is normal or has a specific error. There are no simulators which can simulate the state transition of an elevator. A transition of the dynamic characteristics of an elevator according to the operation of the safety logic has a high level of influence in terms of elevator safety. To accurately evaluate safety of an elevator, we need a simulator that can continuously and precisely simulate the state transitions of a running elevator. Therefore, we developed a simulator that combines a safety logic simulation model and a dynamic simulation model, which expresses the consecutive transitions of states of the elevator. Using this simulator allowed us to precisely express the continuous transitions of an elevator This simulator is composed by the follo