基于岩体波速的Hoek_Brow_省略_则预测岩体力学参数方法及工程应用_夏开宗.pdf

32 7 Vol.32 No.7 2013 7 Chinese Journal of Rock Mechanics and Engineering July 2013 Hoek-Brown ( 430071) GSI D Hoek-Brown ()() E. Hoek E. Hoek Hoek-Brown TU 45 A 2013 ESTIMATION OF ROCK MASS MECHANICAL PARAMETERS BASED ON ULTRASONIC VELOCITY OF ROCK MASS AND HOEK-BROWN CRITERION AND ITS APPLICATION TO ENGINEERING XIA KaizongCHEN CongxinLIU XiuminZHENG YunZHOU Yichao (State Key Laboratory of Geomechanics and Geotechnical EngineeringInstitute of Rock and Soil Mechanics Chinese Academy of SciencesWuhanHubei 430071China) Abstract According to the established calculation formulae of geological strength index(GSI) and disturbed factor D for rock masses estimated by ultrasonic velocity of rock massthe rock mass mechanical parameters are predicted by Hoek-Brown criterion based on ultrasonic velocity(the method of rock mass ultrasonic velocity for short). Thentaking Lancang River cross domain engineering slope rock mass of ChinaMyanmar oil and gas pipelines(domestic section) for examplebased on the rock physico-mechanical parameters which were obtained by laboratory test and the wave test datathe rock mass mechanical parameters can be assessed according to the method of rock mass ultrasonic velocity and the Hoek-Brown criterion. It is shown that the calculation results of the method of rock mass ultrasonic velocity accords well with that of the method proposed by E. Hoek. The rationality of the method of rock mass ultrasonic velocity is further explained by numerical results. In additionthe proposed method provides a new approach to determine the mechanical parameters of rock masswhen test data are scant. Key w