第三章 键,花键及销联结课件.ppt

;§ 3-1 键联接 Key joints 分类 Types of the key joints 平键联接的尺寸选择和强度计算 Option of sizes and strength calculations for straight key joints ;一、分类 Types of the key joints;普通平键联接 Ordinary straight key joints;导向平键和滑键 Guiding and sliding straight key;3. 半圆键 Woodruff key;4. 楔键联接 Taper key joint;5. 切向键联接 Tangent double-taper key joint;1、失效形式Types of failure ⑴主要失效形式 The main types of failure： 工作面压溃Crushing（静联接 Fixed joints） 工作面磨损 Wear（动联接 Sliding joints）;;2. 计算公式 Calculations;3. 平键联接的计算步骤 Design procedure for straight key joints; 花键联接的特点 Features of spline joints 花键联接的分类 Types of spline joints;一、花键联接的特点 Features of spline joints;二、花键联接的分类 Types of spline joints （矩形花键 Rectangle spline、渐开线花键Involute spline ??三角形花键Triangle spline ）;三、花键的定心方式Centering methods of spline ;渐开线花键定心方式;§3-3 销联接 Pin joints;（1）定位 Locating （2）安全装置 Safety device （3）传递不大的载荷 Transmit relatively small loads;二、销的分类 Types of pin （1）普通圆柱销 Plain cylindrical pins （多次装拆，定位精度下降 Locating precision is lowered after disassembled many times） （2）普通圆锥销 Plain taper pins （锥度1：50 、自锁、可以多次装拆 With a taper of 1:50,selflocking, may be disassembled for many times ）;;傅迂盐与梅邱皿镍缨域旭呼彤优肄筹档就漆填翅瞪熏具嘴卵插穆正燕任诊第三章 键,花键及销联结课件第三章 键,花键及销联结课件;BACK