基于压缩感知的回转支承振动监测信号采集方法.pdfVIP

Vo 1.37 No.5 第 37 卷第5 期 南京工业大学学报(自然科学版) 2015 年9 月 JOURNAL OF NANJING TECH UNIVERSITY (Natural Science Edition) Sep. 2015 doi: 10.3969/j.issn.1671-7627.2015.05.008 基于压缩感知的回转支承振动监测信号采集方法 佟路，王华，洪荣晶 (南京工业大学机械与动力工程学院，江苏南京 210009) 摘 要:针对回转支承健康状态监测中数据采集模块存在较大数据量的存储和传输问题，以振动信号为对象，研 究回转支承信号处理中的压缩感知技术。发现经过小波l到值去嗓处理后的振动信号在频域具有较好的稀疏性，从 而提出了对回转支承的振动信号进行压缩采样并将采样数据发送至上位机接收端，在接收端利用正交匹配追踪算 法重构出信号的方法。仿真试验表明压缩感知技术在回转支承振动信号采集中的可行性，为数采模块低功耗高效 率的采集提供了新方法。 关键词:压缩感知;稀疏表示;正交匹配追踪算法:振动信号 中图分类号: TH-39 文章编号: 1671 一7627 (2015) 05-0048-05 Slewing bearing vibration signal acquisition based on compressed sensing TONG Lu ,WANG Hua ,HONG Rongjin ( College of Mechanical and Power Engineering ,Nanjing Tech University ,Nanjing 21∞09 ， China) Abstract: To solve the problem of a large amount of data storage and transmission of data acquisition module in slewing bearing health monitoring ,the compressed sensing technology of slewing bearing vibration signal processing was studied .lt was found that after wavelet threshold de-noising processing ,the vibration signals had good sparse in the frequency domain. So a method with using the orthogonal matching pursuit algorithm to reconstruct the signal at the receiving end for receiving sampling data was proposed. The sampling data was obtained by compressing and sampling vibration signal of the rotary bearing. The simulation test showed that compression perception technology was feasible in the area of the rota巧r bearing vibration signal acquisition .lt provided a new way for the module with lower power and