考虑注浆压力的顶管施工引起土体变形计算方法.pdfVIP

第 33 卷第 1 期 岩土力学 Vo l.33 NO.l 2012 年 1 月 Rock and Soil Mechanics Jan. 2012 ang 文章篇号I 1000-7598 (2012) 01-0204-05 考虑注浆压力的顶管施工引起土体变形计算方法 李方楠口，沈水龙 l ， 2 ，罗春泳 1 ， 2 (1 上海交通大学船舶海洋与建筑工程学院，上海 200240; 2. 上海交通大学国家海洋工程重点试验室，上海 200240) 摘 要z 顶管施工引起周围地层变形的计算预测是顶管施工中必须加以重视的问题。地层的沉降变形与顶管施工的几个环节 有密切的联系，如:①顶管姿态与开挖面土压:②顶进与换管:③注浆过程等。理论分析应考虑这几个施工中的关键因素。 针对上述施工影响因素，提出了考虑注浆压力的顶管施工的地层移动的计算方法。用 Mindlin 的位移解分析模拟开挖面土压、 顶进与换管过程中的侧面摩擦力的变化引起的位移;以 Sagaseta 的士体损失引起的士体位移模式分析姿态控制、土体损失等 引起的变形:将圆孔扩张的 Verruijt 解拓展到二维，用于计算注浆压力引起的位移与变形。结果表明，考虑注浆压力的变化， 可以得到更为合理的预测结果。 关键词g 顶管:注浆压力;土体变形 中固分类号: TU 443 文献标识码:A Prediction approach of ground deformation induced by pipe jacking construction considering grouting pressure LI Fang-nanl , 2 , SHEN Shui·long1, 2 , LUO Chun-yongl , 2 ( 1. Schoo1 ofNava1 Architecture,Ocean and Civi1 Engineering,Shanghai Jiaotong University,Shanghai 200240 ,China; 2. State Key Laboratory ofOcean Engineering, Shanghai Jiaotong University, Shanghai 200240, China) Abstract: Prediction of ground deformation caωed by pipe jacking is very important for safe construction. During the construction of pipe jacki吨， thè ground deformation will be influenced by: ( the attitude of pipe jacking machine and the supporting pressure on excavation face; ( the jacking process and the course of changing pipes; @the grouting process , etc.. To analyze the ground movement during the construction of pipe jacki吨， a numerical approach is proposed.ηle Mindlin solution to vertical and horizontal force is used to ca1culate the ground deformation induced by the face support pressure and the lateral 企iction resistance , respectively. ηle Sagaseta method is adopted to consider the ground loss induced b