羧甲基壳聚糖吸附废水中锌离子工艺的优化.pdfVIP

  • 5
  • 0
  • 约1.15万字
  • 约 4页
  • 2017-05-31 发布于天津
  • 举报

羧甲基壳聚糖吸附废水中锌离子工艺的优化.pdf

羧甲基壳聚糖吸附废水中锌离子工艺的优化

2015年 7月 化 学 研 究 394 第 26卷 第 4期 CHEM ICAL RESEARCH http://hxya.cbpt.cnki.net 羧 甲基壳聚糖吸附废水 中锌离子工艺的优化 卓大权,李思东,李楚燕,胡 章 吴湛霞 (广东海洋大学 理学 院化学系 ,广东 湛江 524088) 摘 要 :研究羧 甲基壳聚糖吸附废水 中锌离子 ,通过考察羧 甲基壳聚糖质量浓度 、处理温度和处理时间等影响因 素,以吸附率为响应指标 ,采用响应面法进行工艺优化 .结果表明,吸附最佳工艺条件为羧 甲基壳聚糖质量浓度 5g·I 、处理温度 7O℃和反应 时间4.37h.在此优化条件 下羧 甲基壳 聚糖对废水 中锌离子 的吸 附率为 92.45 ,与模型预测值 (92.30 )非常吻合. 关键词 :羧 甲基壳聚糖 ;锌离子 ;吸 附;响应面法 ;工艺优化 中图分类号 :TQ225.2 文献标志码 :A 文章编号 :1008—1011(2015)04—0394~O4 Optim izationofadsorption processofzincionsinwastewater bycarboxymethylchitosan ZHUO Daquan,LISidong,LIChuyan,HU Zhang ,W U Zhanxia (DepartmentoyChemistry,CollegeofScience,GuangdongOceanUniversity,Zhanjiang524088,Guangdong,China) Abstract:Anoptimization ofabsorptionprocessofzincionsin wastewaterby carboxymethyl chitosan wasstudied by usingresponsesurfacemethodology.Theadsorption percentagewas takenastheresponseindicatorandthreeindependentvariables(massconcentrationofcarboxy— methylchitosan,treatmenttemperatureand treatmentduration)were investigated.Results showedthattheoptimalabsorptionconditionswereasfollows:M assconcentrationofcarboxy— methylchitosan5g ·L ,treatmenttemperature7O ℃ andtreatmentduration4.37h.Under theseconditions,theadsorption percentagewas92.45 ,which waswellmatched with that (92.30 )ofthepredictedvaluebythemodelequation. Keywords:carboxymethylchitosan;zinc ions;absorption;response surface methodology; processoptim ization 许多工业生产会排放大量含锌废液 ,其锌含量 度锌的研究 尚不多见.壳聚糖及其衍生物吸附剂 , ~ 般达 3~150mg·L一,而锌废水具有持久性、毒 其来源广泛 ,质优价廉 ,后处理方便 ,在重金属处理 性大 、污染严重等特点.锌离子主要通过食物链及 方面发展 迅速_3],但对 锌 离子 的吸 附研 究较 生物富集方式在人体内累积 聚集 ,抑制吞 噬细胞 的

文档评论(0)

1亿VIP精品文档

相关文档