铝合金-碳钢管的磁脉冲变形连接.pdfVIP

H11 1\ Available online at _- Transactions of =r元 -;; ScienceDirect Nonferrous 如letals Science Society of China ELSEVIER Press Trans. Nonferrous Met. Soc. China 22(2012) s548-s552 Magnetic pulse joining of aluminum alloy-carbon steel tubes 1 1 1 YU Hai-ping口， XU Zhi-dan , JIANG Hong-wei\ ZHAO Zhi-xue , LI Chun-feng 1. National Key Laboratory for Precision Hot Processing ofMetals , School ofMaterials Science and Engineering , Harbin Institute ofTechnology, Harbin 150001 , China; 2. State Key Laboratory ofAdvanced Welding and Joining , School ofMaterials Science and Engineering, Harbin Institute ofTechnology, Harbin 150001, China Received 28 August 2012; accepted 25 October 2012 Abstract: The magnetic pulse joining (MPJ) between 3A21 aluminum al10y and steel 20 tubes was experimentally investigated with a solenoid coil assisted by a field shaper. The mechanical properties and microstructure ofMPJ joints were tested and observed. The results show that the metallurgical joints can be obtained at a voltage of 15 kV , a radial gap of 1.2一1 .4 mm , and a slope angle of 0 0 3 -7 in the lapping area. Thejoint com