采动区框架结构新型抗变形支座的有限元.pdfVIP

  • 1
  • 0
  • 约3.05万字
  • 约 6页
  • 2017-06-04 发布于北京
  • 举报

采动区框架结构新型抗变形支座的有限元.pdf

采动区框架结构新型抗变形支座的有限元.pdf

第 10 卷第 6 期 Vol.1O No.6 江南大学学报(自然科学版) 2011 年 12 月 Journal of Jiangnan University(Natural Science Edition) Dec. 2011 采动区框架结构新型抗变形支座的有限元 郑玉莹1 , 夏军武2 (1.中国矿业大学徐海学院,江苏徐州 221008;2. 中国矿业大学力学与建筑工程学院,江苏徐州 221116) 摘 要:对现有地表变形作用机理进行归纳和总结,结合机械自锁原理,设计了一种新型抗变形支 座装直。并且建立框架、支庄和地基有限元模型,通过有限元模拟地表变形来研究支座装直的抗变 形性能。由框架柱脚内力·基础位移变化曲线圈,发现一般结构随地表变形增加附加内力值也随之 增大,而使用了新型抗变形支座装直的有限元模型几乎没有变形,内力变化也很小。最后得出抗变 形支座装直具有保护结构不受地表变形影响的作用。 关键词:采动区;框架结构;抗变形;地表变形 中图分类号:TU 391 文献标识码:A 文章编号:1671 -7147(2011 )06 - 0703 - 06 Finite Element Research on New Anti-Deformation Equipment for Frame Structures in Mining Subsidence Area ZHENG Yu-ying 1 , XIA Jun-wu2 ( 1. Xuhai College , China University of Mining and Technology , Xuzhou 221∞8 , China; 2. College of Mechanics and Civil Engineering , China University of Mining and Technology , Xuzhou 221116 , China) Abstract: This paper , summarizes the surface deformation mechanism. Combined with the principle of self-Iock research , a kind of new resistance to deformation bearing device is designed. A frame , bearing device .and foundation finite element model are created. Finite-element simulates surface deformation in order to study the properties of new anti-deformation device. ßased on the graphs of frame column foot force-foundation displacement , it is found that the additional intemal force in frame will be growing larger when the ground deformation is increasing , whereas the model with new anti-deformation equipment have hardly any deformation , and the change of intemal force is very small. Finally it is concluded that the anti-deformation equipment is effe

文档评论(0)

1亿VIP精品文档

相关文档