A356铝合金近球晶组织三维重构及空间结构表征.pdfVIP

《热加工工艺} 2013 年 9 月第 42 卷第 17 期 A356 铝合金近球晶组织三维重构及空间结构表征 朱会，杨湘杰，郭洪民l，3 (1.南昌大学机电工程学院，江西南昌 330031 ;2. 南昌大学材料科学与工程学院，江西南昌 330031 ;3. 江西省高性能 精确成形重点实验室，江西南昌 330031) 摘 要:应用 LSPSF 流变铸造工艺，制备了 A356 铝合金半固态浆料。应用基于连续切片技术的三维重构方法，对 流变铸造 A356 铝合金微观组织进行了三维重构，获得了 A356 铝合金微观组织的三维空间结构及其分布状况。定义了 三个定量表征的参量，从三维的角度描述了初生固相的数量、大小和平均等效直径。得出流变铸造A356 铝合金微观组 织的固相分数儿严74%，形状因子 F=O.51 ，平均当量直径D=9 1.45 μm。 关键词:三维重构;连续切片;空间结构;定量表征;流变铸造 中图分类号:TG249.2 文献标识码:A 文章编号: 1001-3814(2013)17-0027-05 Three-dimensional Reconstruction and Space Structure Characterization of A356 Al Near Spherulite Microstructure 1 ZHU HuP,3, YANG Xiangjie ,3, GUO Hongmin2,3 (1. School of Mechatronics and Engineering , Nanchang University, Nanchang 330031 , China; 2. Key Lab of Near Net Forming in JXp ,Nanchang 330031 , China; 3. School ofMaterial Science,Nanchang University,Nanchang 330031 , China) Abstract: Using LSPSF rheocasting process，也eprep缸由on of semi-solid sluny ofA3 56 alloy were studied. Through the application of 3D reconstruction based on serial sectioning technique，也ree-dimensional reconstruction of A356 aluminum alloy microstructure on the rheocasting were introduced. A356 aluminum microscopic 也ree-dimensional s住ucωre of the microstructure and its distribution was gotten.ηrree quantitative characterization p缸ameters 丘om the angle of the 仕rree-dimensional description of the nascent solid phase number, size , and 也e average equivalent diameter is defi.ned. The rheocasting A356 alloy process of solid 企actionjv =74% , shape factor F=O.51 , average equivalent diameter D=91.45 μmls go忧en. Key words: three-dimensional reconstruction; serial sections; space structure ;quantitative characterizatio