xp系统弊病恢复操纵台修复（国外英文资料）.doc

xp系统故障恢复控制台修复（国外英文资料） Then restore the consoles prompt state to the EXIT restart. (2) damage or loss of the system boot file When the system is started, the system calls for a reboot when it is unable to find NTLDR or NTDETECT.COM. This situation occurs more often in the same partition as multiple systems, or some error-handling, removing files under the system root directory. Both of these files can be found under the i386 directory on the cd-rom, which is copied directly to the systems root directory. First, enter the restore console, and then enter (assuming the disc character is D) : COPY D: \ \ i386 \ NTLDR C: \ \ or COPY dw: (if the prompt file exists, it can be overridden) and then hit EXIT to restart. (3) BOOT configuration file boot.ini is damaged or lost This happens more often than not in the order of multiple systems, or some of the wrong actions. Hold multiple BOOT menu system BOOT. INI is lost or destroyed, after BOOT menu will disappear (although if you only have one system, it can start in the default directory, but it will have an error message,. In fact, this error is simple enough that we can rebuild the boot.ini file using the BOOTCFG command of the restore console. Enter the recovery console first, and then in the prompt input: BOOTCFG/REBUILD, then the system will automatically scan all disks for the operating system can be added to the start menu. After the scanning, the system will list the operating system can be found, and then you can choose which one is loaded into the BOOT. INI (press Y said is, according to the N said no, said in A full). Then the prompt enter load identification project name, enter the start, when the tip enter OS load option enter boot parameters (usually FASTDETECT, also can be other, such as NODETECT), then press enter to restore console prompt, type EXIT to restart, start menu is appeared again. Loss of system files Sometimes encounter this kind of situation, in the process of the system startup, prompt seed Windo