VISTA120快速编程手册(国外英文资料).docVIP

VISTA120快速编程手册 honeywell VISTA - 120 fast programming manual Set 6160 programming keyboard address 01 (because the new hosts keyboard address is set 00, no indication when the initial charge was added Press 1, 3 key 5 seconds, keyboard display Addr = 31 or Addr = 00, enter 01 The keyboard is green, the keyboard shows * * DISARMED * * * READT TO ARM When the keyboard address is 00, the keyboard cant operate after the program has been programmed. Note: 6148 keyboard cannot be programmed Second, system daily operation 1, go out protection The green light (READY) light indicates that all areas are not triggered, and can be out and out, Enter user password 2. For example, the user password is 1234, and the outgoing security operation is 1234 2. The red light (ARMEO) is bright, indicating that the system is in and out. The green light (READY) does not indicate that there is an area that is triggered or the line, the address module is faulty and the keyboard shows FAULT XXX, look for the reason. Note: many customers do not use the user password in actual use, only use the installation staff code (4140) The cloth/withdrawal operation, which is not good, is easy to cause problems, such as: when you enter the maximum cloth defense, you cannot withdraw Proof. So it is highly recommended that users program at least one user password (permissions 1-3) after the host programming is complete Level), use user password to operate the host cloth to remove the work. 2, the machine will The system did not call the police during the period of the defense, entering the users password (for example, 1234) 1, and the system was removed. The system will call the alarm during the protection period, enter the users password (for example, 1234) 1, and the system will be removed. Repeat to lose In order to clear the alarm memory. After the by-pass zone, the protection will be made The alarm system sometimes does not need to be protected against all areas, and it is necessary to bypass the non-de