家具设计的注意事项(国外英文资料).docVIP

家具设计的注意事项 Furniture design considerations (1) the design of a large wardrobe In this section, I take a simple two-door wardrobe as an example, introducing the design of a large wardrobe. The basic functions of the wardrobe: (1) hang pants, coat, and coat (all three of these Spaces are to install a hanger); (2) deposit a quilt, a shoe box, and a backpack (the three Spaces in the back are designed to be Spaces); (3) you can also consider designing one or two small drawers at the bottom of the wardrobe. The basic distribution of each space The whole space distribution of the large wardrobe is roughly divided into upper, middle and lower regions: (1) upper area (between the top and middle of the wardrobe) The top should be a quilt location, depositing some the size of the backpack can not commonly used, but avoid by all means put shoe box raised high above, dont feel very good; (2) in the middle area (with the owners height as the highest and flexible) It is the place where the pants, the coat, the coat, the coat is on the side, the trousers and the coat on the other side; (3) the lower part (between the bottom and the middle) The best place to store a shoe box, make a drawer, and keep some of your favorite backpacks. 3, each space dimension standard (1) the depth of a large wardrobe is 55 to 60 centimeters. If space is not very nervous, I suggest to select 60 cm depth is good, and 55 and 60 cm manufacturers charge is the same, but the feeling of you hang clothes are different. (2) the width of the cabinet door is between 45 and 60 centimeters, and the width of the push cabinet door is between 60 and 80 centimeters for the best. The bearing capacity of the hinges is not as good as the track, so it is not too wide and too wide for the door. (3) the height of the coat is 140 centimeters high enough for use; Through my familys practice, the longest sleeping robe is less than 140 cm long, and the long down jacket is 130 cm long, and the suit receives 120 cm long. Used to h