基于arduino的无线脉搏监护平台的设计-systemChenghuZhang.PDFVIP

2nd International Conference on Electrical, Computer Engineering and Electronics (ICECEE 2015) The design and implementation of one wireless pulse monitor and alarm system Chenghu Zhang Computer Department, Chengdu Medical College, Chengdu, 610083, China Email: zhang.cheng.hu@163.com Keywords : Single Chip Microcomputer; The pulse sensor; Wireless Communication Abstract. In this article, we introduce one kind of pulse monitoring system which based on IOT(Internet of things) and used for monitoring the patients’ condition. First of all, the pulse sensor gather the pulse information of a patient and send the information to the pulse signal transceiver. Then the pulse signal transceiver send the signal to the main control device, and then the main control device judge the information and send the results to the user through GSM text messages module at last. Preface Body temperature, pulse, blood pressure, breath is main sign of life. The changes of pulse can indirectly reflect the changes of heart rate, blood pressure, respiration, body temperature and other signs.[1]So developing one sign monitor and alarm system which mainly measure the pulse signal has practical significance. The overall design of the system One hospital has many wards (here, we set the ward’s number as n, and the serial number is R1~ Rn), and every ward has one pulse ’s signal transceiver. One ward has several hospital beds (here, we set the bed ’s number as m, and the serial number is R1-1~ Rn-m), every bed has one pulse ’s signal pick device( the serial number is Pr1-1~ Prn-m). The main control device receive the packaged signal, deal and judge it, and save