JT-04D说明书英文.docVIP

Jinbo Intelligent IC Card Elevator System Installation Operation Manual Hebei Jinbo Intelligent Elevator Equipment Co., Ltd. Telephone: 86-311 Fax: 86-311Catalog I. System Introduction 3 II. System Configuration 3 III. Technical Parameters for Master Control Part of System 3 IV. Function Introduction 3 IX. Installation Instructions 11 X. System Debugging 14 XI. Treatment of Common Faults 15 XII. Points for Attention 16 XIII. Functions of Cards 16 XIV. Operating Instructions Voice Prompt of Cards 17 XV Descriptions of Elevator Number and Office Number 18 I. System Introduction Elevator IC card management system can realize the computer intelligent control and management of elevator passenger, which prevents miscellaneous personnel from using the elevator arbitrarily to come in and go out the building effectively and thus improves the safety management of the building. Every passenger can get a card from the management center and each passenger shall take the elevator by card with specified authority. The arrival floor of each card shall be designated by the property management department when the card is issued. The cardholder can only press key for selecting parking floor, call landing and park at arrival floor on designated floor; and the cardholder can neither call landing nor park on non-designated floor. The system, which can only change the floor selection authority function of elevator, can not change the running function of elevator. It adds management function based on the original functions of elevator. It adopts contactless IC card control and the content of the card occupies two sectors in the card, so it can share one card with other systems to realize the regional all-purpose card function. II. System Configuration This system consists of hardware and soft ware. The hard ware includes main controller. Card antenna, power supply, smart card device, IC card etc. which constitute car call control system, and the software part