磁场增强压电悬臂梁震动发电装置.pdfVIP

331 Vol. 33 No. 1 20112 PIEZOELECTRICS COUSTOOPT ICS Feb. 2011 :2011) 1 1 1 1 2 2 韩权威 , 李 坤 , 严 玲 , 周金龙, 王 雨 , 陈王丽华 ( 1. , , 213164; 2. , ) :, , , 100 k, (LDS) 0. 200 V , 75 mm 7.8 mm 0.35 mm ( PLZT ) 80 mm 7.8 mm0. 10 mm 19.02 V 1. 8 mJ :; ;; ; :T N384;O59 : Magnetic Field Enhanced Piezoelectric CantileverStructure Vibration Generator 1 1 1 1 2 2 HAN Quanwei , L Kun , YAN Ling , ZHOU Jinlong , WANG Yu , CHANHelen Lamwah ( 1. College of Materials Science and Engineering, Jiangsu Polytechnic University, Changzhou 213164, China; 2. Dept. of pplied Physics and Materials Research Centre, T he Hong Kong Polytechnic University, Hong Kong) Abstract: The swing amplitude of the piezoelectric cantilever can be improved via applying a nonuniform mag netic force on its free end.T he effect of the magneticforce on the resonant frequency shift, output voltage and output power of the cantilever has been investigated. T he results showed that the output voltage and output power of the cantilever could be improved obviously when a nonlinear magnetic repulsion force was applied. When a 100 k resis tor was loaded and the vibrator ( LDS, Ling Dynamic System) was driven by 0.200 V sine wave voltage, the output voltage and output power of the cantilever, which was composed of a piece of PLZT ( size of 75 mm 7.8 mm 0. 35 mm) and a piece of brass ( size of 80 mm 7. 8 mm 0. 10 mm) , were found to be 19. 02 V and 1. 8 mJ respectively at resonant frequency. Key words: piezelectric;cantilever; vibration sensor;piezoelectric generator; magnetic field enhanced vibration 0 引言