wincc和S7-200如何通信(国外英文资料).docVIP

wincc和S7-200如何通信(国外英文资料) How do WinCC and S7-200 communicate? Research on implementation of S7-200 series PLC and monitoring computer communication ?? 1 Introduction SIEMENS industrial control products in the field of industrial control applications, the market has a higher share, S7-200 series PLC is a member of the SIEMENS SIMATIC PLC family, SIEMENS industry in the field of application occupies an important position. The S7-200 series PLC is small in size, powerful in hardware and software, and easy to configure. The system composed of it can be connected with the powerful Profibus field bus. As soon as it came to the market, it has been widely used in all walks of life. But in practical engineering, the problem of communication between supervisory computer and S7-200 series PLC has been met. The SIEMENS S7-200 series PLC configuration software WinCC launched late, so WinCC communication are not integrated S7-200 series PLC driver; communication protocol of S7-200 series PLC is not open, the application of the third party software monitoring program is also a problem. These problems bring some limitations to the application of S7-200 series PLC, in order to solve the practical engineering problems, the author has done some research, this paper will discuss the S7-200 series PLC and computer communication research results. ??? The main method of 2 S7-200 series PLC monitoring ??? In most control systems, it is not enough to realize control. In many cases, the configuration monitoring interface is needed to monitor the system. Through monitoring, it can increase the ability of human-computer interaction, so that the operator can monitor the operation of the system in real time and make the operation of the system convenient. ??? There are three ways to monitor the control system of S7-200 series PLC: configuration software monitoring, third party software monitoring, software monitoring and touch screen monitoring. ??? Configuration software WinCC to monitor, power