电机温升试验(国外英文资料).docVIP

电机温升试验(国外英文资料) Motor temperature rise test The insulation life of the motor is closely related to the operation temperature. In order to ensure the safe and reasonable use of the motor, it is necessary to monitor and measure the temperature of the motor winding, core and other parts. According to the national standard, the motor winding with different insulation levels has different allowable temperature rise, as shown in the following table Insulation level Required temperature of insulation structure ambient temperature Hot spot temperature Temperature rise limit A One hundred and five Forty Five Sixty E One hundred and twenty Forty Five Seventy-five B One hundred and thirty Forty Ten Eighty F One hundred and fifty-five Forty Ten One hundred and five H One hundred and eighty Forty Fifteen One hundred and twenty-five If more than the specified value, such as the B insulation motor, the temperature rise of 10 degrees each, the motor life will be reduced by half. Therefore, the temperature rise test of motor and accurate measurement of temperature of components are very important for improving the design and manufacturing process of motor and improving the quality of motor For the temperature measurement of motor windings and other parts, at present, although many advanced techniques have been adopted, they can be summed up as three basic methods: resistance method, thermometer method and embedded temperature meter method. Resistance method In a certain temperature range, the resistance value of the motor winding will increase with the increase of temperature, and there is a certain function between its resistance and temperature. According to this principle, it is possible to determine the temperature by measuring the resistance of the motor winding, so it is called resistance measurement. When the winding temperature is in the range of -50~150, the temperature rise is determined below Delta theta = (Rf-R0) (k+ theta 0) /R0+ theta 0- theta f The R0 and theta 0 are