电水壶安规测试标准(国外英文资料).docVIP

电水壶安规测试标准(国外英文资料) Standard Specification for electric kettle safety test Reference standard: EN60335-1:1994; EN60335-2-15:1996/1999A1 Standard clause Inspection item Standard requirement Result Explain Six type Six point one Classification of protection against electric shock: O, OI, I, II, II Class I Six point two Classification of moisture resistance: ordinary, drip proof, splash proof and watertight ordinary Seven sign Seven point one Mark description Must have standard rated parameters, models and trademarks, Use the wet cloth to wipe the water mark 15S, then soaked in gasoline cloth 15S, signs should be clear signs cannot be easily removed, nor should the occurrence of curling phenomenon. Seven point six Correct use of symbols V, A, L, ~, Hz, W and so on Seven point eight Its not a Z type appliance 1., have zero line mark N 2. earth sign Seven point one zero A clear indication of opening and closing ON and OFF markers Seven point one two Description of content should be warning, the official language English, German Seven point one four The markings are clear and clearly visible, and can not be marked on the parts removed by cocoa Eight electric-shock safeguard 8.1.1 FIG1 test refers to safety performance test The power line can not enter the internal contact heating tube Live part Ten Input and output power Ten point one Input power Rated power: +5%, -10% Eleven fever Enter 1.15 times the rated power The heating line, the switch, the thermostat, the internal wiring, the test floor, the test angle, the wall, the handle and the knob of the heating element shall not exceed the requirements of Schedule 1 Thirteen Leakage current and electrical strength at operating temperature See below Thirteen point one Leakage current test Live parts - housings 0.25mA Live parts - grounding 0.75mA Test voltage is V, test point is plastic shell, touch part, leakage current is mA, test point is metal, leakage current is mA. Thirteen point two Electrical strength test: basic insu