子网掩码换算方法(国外英文资料).docVIP

子网掩码换算方法(国外英文资料)255.0.0.0 - - 111111- / 8255.128.0.0 - -1111110000000-9 1-9255.192.0.0 -- 111111.1111.1100,000/10255.255.252.0 - - 1111.1111.1111.111100.000/22255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.255.250.1111.1111.1111.255.255.255.128-1111.1111.1111.11111111111111111111110/251255.255.255.255.192 -- 1111.1111.1111.1111.1111.11/26255.255.255.224 -- 1111.1111.1111.1111.1111.1110/27255.255.255.240-1111.1111.1111.111111.1111111111111111111111111111111111111111111111111111111111111111111111111111111111255.255.255.255.248-1111.1111.1111.1111111111111111111111110110/291255.255.255.255.255.255.255.255.255.255.255.255.255.255.252.1111.1111.1111.1111.1111.1111111110/30 1How many subnets? Because 192 ---- there are two. The result is 2 ^ 2 = 4 four subnetsHow many hosts are there in each subnet? Here are six host and = = 2 ^ 6-2 = 62 hosts.What are legal subnets? 256-192 = 64. We started at 0 and measured in chunksSo our subnet is 0, 64, 128, 192.A, in this paper,Recently in my BBS discussion about subnet mask and subnetting is more, because the front also wrote a tutorial on the IP address, for the sake of continuity, wrote this about the subnet mask and subnetting tutorial, learn the basis of this tutorial require a master (except, of course), suggest that read the previous tutorial on IP, to read a tutorial. Are you ready? Lets get started!!The concept and function of the subnet maskSubnet mask is a applied to the 32-bit binary value of the TCP/IP network, it can block out part of the IP address, so as to isolate sections with the host IP address in the network, based on subnet mask, administrator network can be further divided into several subnets.Why do you need a subnet maskAlthough we say subnet mask can separate the parts with the host IP address in the network, but you still have questions, such as: why do you want to distinguish between network address and host address? What