亚运营销促销方案(..).doc

“订欧派家居，看亚运决赛” 亚运营销策划方案 第一部分：促销活动 一、促销时间：2010年10月29日-11月14日 二、促销地点：全国各欧派商场 三、促销主题 “订欧派家居，看亚运决赛” -----欧派全国2000专营店携手亚运合作伙伴“广之旅”联合奉献饕餮盛宴！ 睹亚运新广州 观欧派世界级家居制造基地 游璀璨珠江 赏激情赛事 四、促销内容 1、送“纪念礼品” 活动期间，凡光顾欧派商场，均可获赠“纪念礼品”一份。 2、抽“亚运决赛门票” 凡订购欧派橱柜金额（含电器/配件）达15000元，即可参加“亚运决赛门票”抽奖活动，即买即抽，现场开奖。中奖者可获双人豪华亚运之旅。 3、超值“冠军”套餐 超值橱柜套餐：3米地柜/台面+1.5米吊柜+PS321A-TC水槽+LB080WLA/LB080TLA/LD04OLB拉篮三件套） 8888元/套 超值套餐如果因自身原因无法广州，可指定其他人员代替如果因中奖者造成的机票有误请由中奖者自负担更改费用。 Ellipticity of elbow pipes with diameters less than or equal to 150 mm must be not greater than 8% diameter of 200 mm or less shall not be greater than 6%. Wall thickness of the pipe wall thinning rate must not exceed the original 15%. Crease roughness: diameter 125 mm or less, shall not exceed 3 mm diameter less than or equal to 200 mm, not more than 4 mm. 7.3.9 simmering bending production of square steel tube extension, to use the whole tube bending. Interface if necessary, the welding position should be located in the middle of the vertical arm. 7.3.10 install expansion joints should be done. If design is not required, pipe compensator lengthen should conform to the requirements in the following table: square scale length δ x is equal to 1/2. Pre stretch tolerance: casing + 5 mm, +10 mm. 7.3.11 pipe form, location, spacing shall meet the design and specifications. 7.3.12 piping on back or return pipe at higher levels of the upper to automatic valve to install a drain valve below the horizontal parts. 7.3.13 supports and hangers of checks and the number 1) hanger installed must be checked before installation of supports and hangers part models, specifications of springs setting values, whether the materials meet the requirements of drawings and documents; 2) supports and hangers of material, size and accuracy shall conform to the provisions of the design drawings, material technical requirements should be consistent with national standards, industry standards and technical requirements related to the alloy spectrum review should be carried