7中英文摘要.doc

基于STM32的16路遥信及16路遥控单元的设计及应用 摘　　要 在工业自动化控制系统中，一些设备开关的开合，如企业照明配电、生产线的停止或者运行、大量的配电用户的开关闸，在以往的启动和关闭这些设备，都是采用人力去开关闸，这不仅浪费人力资源，提高了企业和大量配电用户的成本，而且开关闸也能对人身造成伤害。随着现代人们对生命、财产安全及电气节能管理方面管理考核的日趋重视，人们更渴望利用低压设备控制高压设备，因此本文设计了基于 32 位单片机 STM32为主控芯片，具有 16路开入的遥信单元和16 路输出的遥控单元的设备，实现对终端配电线路进行遥信、遥控的智能配电方案，该方案具有成本低、投资少、安装接线简便等优点，有利于低压智能配电的进一步推广和应用。 关键词：STM32单片机，遥信单元，遥控单元 Based on The Design and Application of Remote Signaling STM32 16 and 16 Remote Control Unit ABSTRACT In the industrial automation and control systems, some of the equipment switches to open and close, such as lighting, power distribution companies, the production line is stopped or running, a large number of users switch brake distribution, start-up and shut down in the past these devices are based on the manpower to switch gates, which not only a waste of human resources, improve the enterprise and a large number of users and distribution costs, but can also cause brake switch bodily injury. As modern peoples life and property safety and electrical energy management aspects of management and evaluation of more importance, people are more eager to take advantage of low-voltage equipment control high-pressure equipment, this article is designed based STM32 32-bit microcontroller as the main chip, with 16 open into the equipment remote control unit and remote communication unit 16 outputs, to achieve the final distribution lines for remote, remote control, intelligent power distribution program, which has a low cost, low investment, easy to install wiring, etc., in favor of low-voltage smart distribution further promotion and application of electricity. Keywords:STM32 microcontroller, Remote signaling unit, Remote control unit 河北大学2014届本科生毕业论文（设计）