某大学综合楼空调防排烟设计说明书毕业设计介绍.doc

******大学 本科生毕业设计说明书 题 目：贵阳市某大学培训综合楼空调及防排烟设计 学生姓名：** 学 号：*********** 专 业：建筑环境与设备工程 班 级：建环10-2班  贵阳市某大学培训综合楼空调及防排烟设计 摘 要 本设计为工程，，空调面积为，建筑总层高为。 关键词：Abstract This project is the design of the HVAC engineering of a university training integrated building in Guiyang City. The ground floor of this building is the garage and equipment room. And there are eleven floors above which mainly include the lecture room, training and reception room, exhibition room and business offices. The overall floorage of this building is about 18562m2, the height is about 48.4m and the air-conditioned area is about 9889.3m2. The main content in this design includes that: the air conditioning and ventilating design of office, exhibition rooms, meeting rooms , base at the different functions and partitions of the building; the design of Cooling Heating Resource in equipment room and air conditioning water system; the ventilating and smoke preventing exhausting system design of the underground rooms and parking in the building; the pressurization air supply system of antechamber and stairwell. Choose the design standard and the alternatives of the project based on the preliminary analysis and search the local design parameters and design standard. Search the products of HVAC manufacturers and to be familiar with the up-to-date technology of O HVAC industry and comply with the laws and codes of the country through out the design process. Perform the drawing of this project with the results of the calculating and finish the economic budget.Analyze the design results and the design parameters, discuss the main problems that encounter in the design process, an sum the design process. Keywords:Load Calculate,Smoke Preventexhaust,CoolingHeating Resource,Mechanical air supply pressure 目录 摘 要 I Abstract II 引 言 1 2 2.1 工程概况 2 2.2 设计计算参数 2 2.2.1 室外气象参数 2 2.2.2 室内设计参数 3 2.2.3 围护结构计算参数 3 第三章 负荷计算 4 3.1 夏季冷负荷计算 4 3.1.1 围护结构冷负荷计算 4 3.1.2 透过玻璃窗日射得热引起的冷负荷 7 3.1.3 室内热源散热引起的冷负荷 8 3.