分离工程(国外英语资料).doc

分离工程(国外英语资料)1. the equilibrium separation process is the transport of the material in the heterogeneous phase, which creates the second phase by operation with the addition of an energy separator and (a substance separator).For 2. to multi component systems, it is necessary to separate C pure products into one component, which requires (C - 1) towers, and the number of processes required for the towers to be composed of (S={2 (n-1))! /n! (n-1)}!3. with the increase of the vapor pressure difference of the pure component, the lowest constant boiling point moves toward the concentration direction of the component containing (low boiling point), while the most Gao Heng boiling point moves toward the concentration direction of the component containing (Gao Feidian).A constant boiling substance formed by 4. negative bias solutions, with relative changes in concentration (from less than 1, equal to 1, greater than 1 continuous change) as the concentration varies from 0 to 1.5., there are usually several ways of recycling in industry: (reducing pressure, raising temperature, ventilation, purging, displacement, desorption)6. according to the adsorption force between adsorbent surface and adsorbate, adsorption can be divided into physical adsorption and chemical adsorption.7., the separation process can be divided into two parts: adsorption of solute in dilute solution and adsorption of concentrated solution.8. non adiabatic absorption process, there are ways to derive heat (intermediate heat conduction, internal heat conduction, cycle heat conduction).9. reverse osmosis membrane separation process is generally used (asymmetric membrane), its raw material is (cellulose acetate and direction of polyamide), and the rejection is solute (salt).10. there are two types of liquid membranes (emulsion liquid membranes and supported liquid membranes).11., the process of supercritical extraction can be roughly divided into two kinds (isothermal pressure change process and isobaric varia