烧行管原因(国外英文资料).docVIP

烧行管原因(国外英文资料) 1. Reason of burner: 1 power supply voltage is too high, 2 lines reverse distance capacitance, 3 row turn interturn short circuit, 4 line frequency is low, 5 line of deviation, 6 line deflection coil turns short circuit. 2. After the shutdown, a bright spot is shown, which can be connected to a 0.47 UF / 600V oil intrusion sealing paper capacitor, or other type of capacitor, in the accelerating G2. 3. Example: a long rainbow 25-inch machine, the grating is bright, has a half-tone and no image brightness potentiometer to reduce the ability to see the image, turning on check 180 power supply, sometimes not, 250V / 10UF bad. 4. Instance: a panda 21 inch machine, boot with grating, no picture and no sound TA7680 open test voltage is normal, the foot high frequency measuring head without TV tuning voltage, 33 power resistance is infinite. 5. Instance: a playmates toys 29 inch machine, boot 3 without, indicator does not boot, shutdown after white raster to sweep line, visual components without exception, with striking, when run into 130 v filter capacitor to normal, a look at the corner of the open welding. 6. Instance: a TV of 14 inch monitors turned with a computer, the boot is chromatic not grating, light temple on, accelerate the normal, depending on the pipes C voltage 135 v (higher), adjust the brightness, contrast, adjustable speed can be see the grating, but have a flyback lines, as ABL (56 k) is broken, change after everything is ok. (03.7.15) 7. Example: a panda type 2118 TV, the voice is not timing when small, there is rustle, observe the power amplifier circuit without exception, an open circuit, measuring speaker a zhi pull, are subject to damage, change after everything is ok. 8. Example: a chrysanthemum 18 color TV, turning on the sound without grating, the electric power creak, the tube C voltage over 150 volts, the filament is not bright, R501 starts the resistance infinity, and the power supply 9. A sanyo 21 inch television: boot a level b