竖向电渣压力焊施工工法(国外英文资料).docVIP

竖向电渣压力焊施工工法(国外英文资料) Vertical electroslag pressure welding construction method Abstract: the application of vertical bar electric slag welding technology is replaced by the method of lapping and manual welding. Applying this technology to ensure the construction quality, reduce engineering cost and speed up the construction schedule, reduce the labor intensity of workers is good effect, and simple operation and easy to grasp. preface The application of vertical bar electric slag welding technology is replaced by the method of using the bonding binding and manual electric welding. Applying this technology to ensure the construction quality, reduce engineering cost and speed up the construction schedule, reduce the labor intensity of workers is good effect, and simple operation and easy to grasp. Welding range: , more high-level framework (or frame shear, etc.) the structure of the vertical bar diameter in 16 ~ 32 ㎜ Ⅰ, Ⅱ, Ⅲ grade steel, the welding joint quality should comply with the regulations rebar welding and acceptance (JGJ18 ~ 84). The basic principle: Electroslag pressure welding is by welding steel end formed between external electric solitary, to melt the solder and get above 2000 ℃ high temperature slag will be welded steel melt end evenly, then through extrusion method and the formation of a welded joint. Detailed process: connect circuits generate electricity alone and lonely, then around the flux and reinforced ends rapidly melting slag pool formation, electroslag pool temperature is controlled in 1500 ~ 2000 ℃, rotating handle, will be on the reinforcement of slow down. Stay two steel melt to the end of a certain program, reinforced is also near to thermoplastic state, when rotating handle, immediately make on jin suddenly fall, all slag and liquid metal extrusion slag pool, form a circle projection light welding joint. Machines and materials 1, equipment, (1) for example, the zhj-600 vertical bar for welding machines manufactured by the city of * * * *