管道面积计算(国外英文资料).docVIP

管道面积计算(国外英文资料) The installation of wind tube shall be calculated according to the expansion area of the construction drawings, and not deduct the area of the inspection hole, the hole, the outlet and the suction vents. The circular tube F is PI times D times L F - the circular wind tube expands the area (measured in m2); D - the diameter of the wind tube; L - pipe line length. The rectangular wind tube is calculated by the perimeter of the pipe by the length of the pipe line. 2, duct length length shall prevail with the center line of the construction is demonstrated and the branch pipe to the center line of the intersection point (director), including elbow, tee, variable diameter tube, the length of the pipe fittings such as nature round place, but not including the components of length. The diameter and circumference shall be carried out in accordance with the drawings, and the overlap of the bites shall be included in the evaluation table, and shall not be increased separately. The installation of wind pipe guide vane is calculated according to the area of the blade. The whole ventilation system is designed to be evenly distributed, and the circular wind tube is calculated according to the average diameter and rectangular wind tube. The diameter of the diameter is the diameter of the diameter and the circumference is the inner circumference. Flexible soft wind pipe installation, according to the line length of the pipe line of the line of m for measuring unit, flexible soft wind tube valve is installed with a as the measurement unit. 7, the hose (canvas interface) is made up, and the measuring unit is m2 according to the graphic size. The wind pipe examines the weight of the hole and is calculated according to the standard weight scale of the national standard ventilation unit in appendix 2 of this valuation form. The installation of the pipe measuring hole shall be measured in terms of its type. 10 purification, thin plate ventilation pipes, ventilation pipes,