铸造中增碳剂使用(国外英文资料).docVIP

铸造中增碳剂使用(国外英文资料) In casting smelting, the use of carbon supplements is of critical importance to the quality of the product, and the advantages and disadvantages of the addition of carbon are also very influential. So lets talk about the use of carbon supplements and how you choose to increase the carbon. The use of o carburetors: 1, the input method of the furnace: The additive is suitable for smelting in induction furnaces, but it is not the same as the process requirement. (1) the use of carburetion in the smelting of medium frequency furnace can be required to be added to the lower part of the electric furnace according to proportion or carbon equivalent, and the recovery rate can be up to 95%. (2) liquid iron rongqing if insufficient carbon adjustment of carbon, the first dozen net furnace slag, plus carburant, by raising the temperature of molten iron, or artificial electromagnetic stirring to dissolve carbon Absorption, recovery in 90, if the low-temperature carbonization process, the melt furnace charge only part of the molten iron liquid under the condition of low temperature, all recarburizer In addition to the iron liquid, the iron liquid will be pressed into the iron liquid without exposing the surface of the iron liquid. This method can increase carbon by more than 1.0 percent. The addition of carbon to the furnace: (1) spray graphite powder in the bag The use of graphite powder is used as a carboloy, and the amount is 40kg/t, which is expected to increase the amount of iron content from 2% to 3%. As the carbon content of the iron is rising, the amount of carbon is used Before the drop, increase carbon liquid iron temperature of 1600 ℃, an average of 1299 ℃ after carburization. Spray graphite powder is used as a carrier for carbon dioxide, but under industrial conditions pressure is applied Reducing air is more convenient, and the oxygen combustion in the compressed air produces CO. The heat of chemical reaction can compensate for partial temperature dr