小功率调频发射机（国外英文资料）.doc

小功率调频发射机（国外英文资料） Before the speech FM transmitter as a simple communication tool, because it does not need to transfer station and the ground switch station support, can be effective mobile communication, therefore is popular among people. It is widely used in small-scale mobile communication projects in fields such as production, security and field engineering. The focus of this project is on the design of the oscillation modulation circuit which provides a stable frequency to the transmitter circuit. The project firstly USES two-stage voltage parallel negative feedback amplifier circuit, amplifies the speech signal properly, and coordinates the modulation level work. Then using quartz crystal oscillation circuit to provide a stable reference frequency carrier for transmitter, then through the varactor complete speech signal to the carrier signal frequency modulation, and choose three times in LC parallel resonant network frequency signal; Finally using two stage power amplifier, already modulation signal power is greatly increased, the higher harmonic filtering through series filter network, finally through the telescopic antenna. Through subsequent circuit simulation and part of the circuit debugging, can prove this topic circuit basic mature, basic can complete the voltage amplification of speech signal, frequency modulation and power amplification, to achieve the requirement of the firing distance. Transmitter is the main task of the complete useful modulation of low frequency signal of high frequency carrier, it becomes in a center frequency has a certain bandwidth, is suitable for the transmission of electromagnetic waves by the antenna. Typically, the transmitter consists of three parts: high frequency, low frequency, and power. High frequency parts usually include main oscillator, buffer amplification, frequency multiplier, intermediate amplification, amplifier stage and final amplifier. The main vibrator is a carrier that produces a stable frequency. In or