打通VxWorks调试环境 Step by Step（国外英文资料）.doc

打通VxWorks调试环境 Step by Step（国外英文资料） The source: Sender: milkway2000, mail area: Embedded A VxWorks debugging environment Step by Step (ZZ) Mail station: qinjan 1 14:23:35 2003, transfer letter The sender: dot (love radish and green vegetables), the mail area: Embedded The VxWorks debugging environment Step by Step Mail station: wuhan baiyun yellow crane station (15:18:22, 2002) Open the VxWorks debugging environment Step by Step Dot anonymou@163.com Dec 31, 2002, All rights reserved A revision history The date revision version describes the author 2002-12-20 1.0 2002-12-31 1.1 changed the position of 3.4 and 3.5, which is to set up the BSP before adding a new project; The configuration method for the four serial port console is added. 1 the introduction 1.1 authoring purpose The outline shows how to set up an environment (X86 version) that USES Tornado development and debugging VxWorks. 1.2 background 1.3 definitions N HOST: HOST, run Tornado integration environment, FTP Server, Target Server, and edit, build Software tools for engineering and downloading target files; TARGET: the TARGET machine, the location of the vxWorks image that the HOST produces, is also a PC for the X86 version ; N TORNADO: C: \ TORNADO, install TORNADOs path; N BSPNAME: C: \ Tornado \ target \ config \ pc486, BSP path, in this case we select pc486; N PROJECT: C: \ Tornado \ proj \ Project2, the path of the PROJECT we created ourselves; N BIN: C: \ Tornado \ host \ x86-win32 \ BIN, Tornados executable path; N HOME: C: \ Tornado \ host \ x82-win32 \ bin, the root directory of the FTP user. Reference data N Tornado Users Guide (Windows Version), 2.0, Edition 1 N VxWorks Programmers Guide, 5.4, Edition 1 General description of 2 2.1 hardware environment HOST and TARGET are interlinked via Ethernet and are in the same network segment; Meanwhile, the serial port is directly connected to the cable (NULL) Modem Cable) connection. The target machine has a floppy disk drive and the network card is