数控机床中电压异常引起的故障（国外英文资料）.doc

数控机床中电压异常引起的故障（国外英文资料） Failure of voltage anomaly in nc machine tool CNC (CNC) is an abbreviation for Computer number control, an automatic machine with programmed control system. The control system is able to handle the with logic control code or other symbols in accordance with procedures prescribed by the instruction, and the decoding, so that the machine movement and machining parts. As a result, the nc machine is a product of high electromechanical integration, which is very common in the fault of voltage anomaly. The nc machine tool power classification according to voltage level and derives relationships, introduce components used in the power supply circuit, combined with the specific maintenance examples abnormal voltage caused by the fault. 1 overview Nc machine tools is mechanical and electrical integration of high-tech products, involving machine, electricity, liquid, gas and computer automatic control and so on many aspects, especially the numerical control system, PLC programmable device and the drive system of microelectronic hardware and software part. It is sensitive to the electrical power of the power grid, or the electrical power of the power grid, which can cause a certain amount of damage to the system. Because it is equivalent to send a wrong instruction to the system, make the system produce misoperation, issued a stop signal according to the numerical control machine tool maintenance experience confirmed that among the total failure, caused by power failure accounted for a large proportion of the. In the power failure of nc machine tool, many of the devices that belong to machine tool users have the ability to rule out failure of the device, and the area of the machine has been repaired. CNC machine power supply The power supply is known as the energy support part of the maintenance system, and the direct result of failure or failure is the systems shutdown or the destruction of the entire system. In addition, the numerical control system pa