松下传真说明（国外英文资料）.doc

松下传真说明（国外英文资料） How do you use the panasonic fax machine One, answer the fax: general cent automatic and manual two kinds. Automatic: when the fax machine receives the callers fax message, it will receive it on its own. 2. Manual: when the user received a fax from the other requirements of information according to start button on the fax machine (usually the key for the green one of the biggest) and then hang up. Fax: 1. The other fax machine is artificial answer: put the need to send the original fax (note: the words down), general fax machine automatically feed back slightly di, explain the fax machine is ready to can fax, picked up the phone and fax number, pull her to send a fax to each other, ask each other for fax signal, the signal to the receiver, the fax machine can hear very sharp, tick and then press start button on the fax machine hang up at the same time, the file will begin to transfer to the other side of the fax machine. If the other person is automatic: it will be heard after a few sounds of the number. When the start button is on the fax machine, the file will start transmitting to the others fax machine. A common fault and maintenance method for the panasonic fax machine A copy of the panasonic fax machine is grey The reflector mirror is speck of dust. Fluorescent tube light. Eliminate the method: 1. Wipe it clean with lens paper. Transform the transparent part of the fluorescent tube to make the light beam to the paper cavity. 2, there is a black ribbon line at one end or both ends of the panasonic fax machine Cause of failure: most are caused by the ageing of fluorescent tubes. Elimination method: replace fluorescent lamp tube. The transom of the tube should be oriented towards the paper cavity. 3, the panasonic fax machine printing test diagram is normal and the photocopy is completely black Cause of failure: 1. Fluorescent lamp tube is equipped with reverse or failure. The photoelectric transformation is partially invalidated. Elimination metho