材料力学模拟题（国外英文资料）.doc

材料力学模拟题（国外英文资料） Material mechanics is a total of 50 points Check the scope of the test: show that the answer to the question only shows that the question is displayed on the exam Answer: the end of the question: 2014-05-28 15:28:58 in total: 00:02:43 One. (50, 100) The saying about constraints is () (2) A. A soft body bound, A deviation from an object along the flexible axis. The smooth contact constraint, the constraint counterforce along the contact surface common normal line, point to the object. C. fixed end support, the counterforce can be orthogonal to two forces. B: thats right. The standard answer: D The stiffness of the component is the component () (2). A. the ability to resist destruction B. no deformation C. the ability to resist deformation The ability to balance The standard answer: C The system is balanced by F = 10KN, which is equal to 10m, and the bending moments of the C section should be (). (2 points) A. 10 kn. M; B. 20 kn. M; C. - 5 kn. M; D. 25 kn. M; It is. The standard answer: D Which of the following components are axial stretch or compression? () 4 (2) (A) (A), (b); (B). (C) (a), (D). The standard answer: A The two sections have the same area, but the shape of the cross section is the same size as the different poles of the material. Are they the same? () (2) A. not equal; B. is equal; C. not sure; The standard answer: B The diagram shows the torsional axis, the correct torque graph (). (2 points) A. figure a. Figure B B. Figure C C. Figure D D. The standard answer: C The load and supporting conditions of the beam are symmetrical in the central C section of the beam, and the correct ones are () in the following conclusion. (2 points) A.Q figure is symmetrical, M figure is symmetrical, and  = 0 B.Q figure is symmetrical, M figure antisymmetric and  = 0 C.Q figure antisymmetric, M figure is symmetrical, and  = 0 D.Q figure antisymmetric, M, according to the figure against and  = 0 The standard answer: C The beams bending moment diagram sh