康佳总线1（国外英文资料）.doc

康佳总线1（国外英文资料） P2902T color TV enters the factory menu method Click the MENU button, display the MENU, press the button five times before the MENU disappears, and enter the factory MENU. Enter the factory MENU and press MENU to bring up the FACTORY1-6. Use the program to select the project (turn red when selected), and set the item parameter with the volume +. Once again, look at the menu of the exit factory. S (SN) machine series After the main menu appears on the menu, you will be able to enter the factory debug mode according to the five times. Press 0 and then go back to the debug mode. Press the digital key option to select the debug item, volume + / volume - to debug the data, and then check the key to confirm the storage. Kangjia CPU is the A type of LC863328A 5T45 Press the menu button and press five game keys, which must be completed in two seconds, to enter the debug menu. Press the game key to quit The cpus are the E series of CKP1004S/CKP1010S Open the bottom half panel of the kk-y131 user remote, show the bottom row of keyhole, add a hole in the left to the conductive glue, and use as the FAC key. 1) press the FAC button, and the upper right corner of the screen shows FACON, which is now in the factorys debug state. 2) enter the corresponding factory menu according to the number of keys 1, 2, 3, 4, 5, 6, 7, 8. 3) press -- the key allows the screen to appear on a horizontal line, then press -- key, and the screen returns to normal. 4) debug project selection by program +, program-key. 5) adjust the value of the item by volume and volume. After debugging, press the FAC button to exit the factory menu. Kangjia CPU is the type A machine of LC863316A KK - with the user remote Y183B restructuring, namely lower lift remote control panel after the patch, show the bottom row button hole, adding to the left of the hole to conductive adhesive used as key FAC. 1) press the FAC button, the screen is not displayed, and press 6, 8, and the top right corner of the scree