硬盘分区表错误与解决办法（国外英文资料）.docVIP

硬盘分区表错误与解决办法（国外英文资料） Because of failure of partition, is likely to open the computer cannot enter the familiar Windows interface, even through the system startup disk is also unable to properly identify the hard disk, then you certainly can do it? If you repartition your hard drive, you will be able to completely solve the problem, but all the important data in your hard drive will be blown away. If you have hard disk partition trouble, dont rush to partition, according to the article introduces the method to give it a try, maybe there will be a surprise. Why does a partitioned table fail After the partition table is damaged, the start System tends to appear when the Non - System disk or disk error, replace disk and press a key to reboot (Non System disk or disk error), error Loading Operating System (load the Dos boot record error) or No, ROM, Basic System Halted (stop, cant enter the ROM, Basic System response) and prompt information. So how does a partitioned table failure occur? The virus causes problems The virus causes the partition table corruption to be one of the most typical failures. Such as the typical CIH virus variant in addition to attack the motherboard BIOS, at the same time also to destruction of the partition table, and there are a lot of boot sector viruses to destroy the partition table. Environmental problems Todays Windows 2000 / XP support NTFS file format, and the default program is using the file format to install the system, if the hard disk partition or is divided into NTFS partition accident or crash, power that is likely to lead to damage of the partition table. And through PQMagic (partition magic) such as third-party partitioning software adjustment capacity of hard disk partition and format conversion partition also exists certain risk, if the crash or power can also lead to the hard disk partition table fault, may even have lost all the data in the hard disk. 3. The improper operation If on a hard disk install multiple operating sys