毕业论文目录修改（国外英文资料）.docVIP

毕业论文目录修改（国外英文资料） A graduate thesis is different from a general essay, especially a masters thesis or a doctoral thesis. A typical small paper is four or five pages long, and a masters thesis is fifty or sixty pages long, some even seventy and eighty pages. So there are things that would be very painful if you had to do it manually. There are at least two painful things: directory automatically generated and numbered, referenced by reference. In this article, we will talk about small tips, auto-generated, and very convenient. Lets start with two painful situations. Set the directory structure of a good article, suddenly found that the middle to add or remove a section, add or remove easily, but behind the sequela is the number of changes to follow. For example, if you want to delete the second chapter, then the third chapter of the principle should be changed to chapter 2, followed by movement, and the addition of the same. The second condition is the reference issue. There are dozens of references in the masters thesis, and the general papers will be asked to list the references in the order of citation. If you need to add new references, the reference Numbers of these references will change again. The directory automatically generates simple words, switches the document to the outline view, and then sets the outline level of the text that you want to set to the directory. If the outline level is set to level 1, then its a level 1 directory, and typically well set it to level 3, which will generate 1, 2, and 3 levels. Once youve set it up, click insert where you want to insert the directory. Reference - Index and directory will do. The format is in addition to the other Settings. Now lets talk about these two simple solutions. First you have to set the paragraph number. Set the first level directory that you want to set to the first grade, the secondary directory is set to the secondary number and so on. As in the bibliography, set the paragraph number. Set out sec