超频和开关机（国外英文资料）.docVIP

超频和开关机（国外英文资料） What is overfrequency?? The hyperfrequency of computers is an artificial way to improve the frequency of hardware such as cpus and graphics CARDS, allowing them to work reliably at higher frequencies than they are rated. With Intel P4C 2.4 GHz CPU as an example, its rated frequency is 2.4 GHz, if to increase the working frequency to 2.6 GHz, the system can still stable operation, the overclocking is successful this time. The main purpose of CPU overfrequency is to increase the CPUs working frequency, which is the main frequency of the CPU. And the main frequency of the CPU is the product of the external and the frequency. For example, a CPU has an external frequency of 100 MHZ, and the frequency is 8.5, and you can calculate the frequency of its main frequency is equal to the external frequency, which is equal to 100 MHZ times 8.5 = 850MHz. The main frequency of the cpus can be achieved by changing the frequency of the cpus or the external frequency. But if youre using Intel cpus, you can ignore it as much as you can, because the IntelCPU USES a special manufacturing process to stop the redoubling. AMDs CPU can be modified twice, but it is better to modify the performance of the CPU than the external frequency. The speed of the external frequency is usually associated with the speed of the front bus and memory. So when you upgrade the CPU, the CPU, system, and memory performance also increases. There are two main types of CPU overfrequency: One is hardware Settings, and one is software setup. The hardware setting is more commonly used, and it is divided into two types: jumper wire and BIOS. Jump wire to set overfrequency Early motherboards mostly used a jumper or DIP switch to perform overtones. In the vicinity of these jumpers and DIP switches, there are often several forms on the motherboard that contain the functions defined by the jump and DIP switches. When you turn it off, you can set it according to the frequency in the table. Once the restart