逻辑分析仪与trace32在嵌入式开发调试中的应用（国外英文资料）.docVIP

逻辑分析仪与trace32在嵌入式开发调试中的应用（国外英文资料） In embedded development debugging, the developers debugging tools include breakpoints, triggering, and tracking three. With the development of integrated circuit technology, a new generation of embedded processor integration and working frequency is higher and higher, chip packaging form is becoming more and more incline to table to stick. Online debugger (ICD) and the combination of the logic analyzer development debug platform has increasingly become the new generation of embedded processor developers to realize the above three kinds of debugging tool of choice. The developer USES the breakpoint function to control the starting and stopping of the debug application. Make the application run on the program that you want to debug. Whether the application that is debugged by the application at the break point and the value of the register and memory is tested correctly. Breakpoints are the debugging tools that developers often use. Breakpoints, as the name suggests, stop. Breakpoints are divided into software breakpoints and hardware breakpoints in terms of their implementation. Software breakpoints are implemented by program instruction traps. Hardware breakpoints are implemented using embedded processors or debugging tool hardware. Method to realize the software breakpoints for different embedded processors and debugging tools, implementation methods are the same, is accomplished by means of modify the program instructions. The implementation of hardware breakpoints is different for different embedded processors and for different debugging tools. Some embedded processors with on-chip debug logic, through the JTAG debugging tools, BDM, OCDS, NEXUS on-chip debug interface access control logic, such as through the on-chip debug logic implementation hardware breakpoint. The number of hardware breakpoints is limited. Because different embedded processors have different debugging logic implementations, the number of hardware breakpoints