长虹CPU,高压包带换（国外英文资料）.docVIP

长虹CPU,高压包带换（国外英文资料） Long rainbow CPU, high pressure pack change The ch-13a bus data is based on three different types: The main chip USES a CH04T1301 (la769317c-53k0) mask The bus data is applicable to the following models: SF2166K The main chip is made of CH04T1302 (LA769317M56J0) The bus data is applicable to the following models: SF2166K (F03), SF2128K, SF2129K, SF2133K. The main chip is made of CH04T1306 (la769317n57r4-e) The bus data is applicable to the following models: SF2166K, SF2166K (F03), SF2128K, SF2129K, SF2133K. Note: 1) when using CH04T1306, the data should be checked at the time of repair The default value of the bus data in the attachment CH04T1306. The new memory should be replaced at CH04T1306, when repaired and repaired. The memory used in CH04T1302 is written ROM correction. Then check if the data is available The default value of the bus data in the attachment CH04T1306. The CH -13b machine core (the main chip adopts the CH04T1303 (la769337n57n7-e)) bus data CH04T1303 for the following models: PF21300 Third, CH - 13 g movement You can use the following models: CH04T1302 and CH04T1306. SF2166K (F25), SF2128K (F25), SF2133K (F25). You can only use the CH04T1306 mask for the following models: PF21118 (F25), SF2111 (F25). Note: like CH04T1306, the CH04T1306 mask will be used to replace the memory and check the memory data. The Chinese and English versions of CH04T1305 (la769317l-57j9) replace the other IC changes points. Replace CH04T1301 (la769317c-53k0) with the following changes on the above bus parameter table: A, change the OPT. VS/FS option from the menu.09 MENU to 0; B) change the option to 0 from the MENU. C) change the OPT. DVD option from the MENU to 0; D, the opt.s/AV2 option on MENU 11 is changed to 0; Replace CH04T1302 (LA769317N56J0) and CH04T1306 (LA769317N57R4) to make the following changes on the above bus parameter table: A, link the 46th foot of CH04T1305 with 48 feet (to make sure the AV2 function is correct); Replace CH04T0306