防辐射服装的原理（国外英文资料）.docVIP

防辐射服装的原理（国外英文资料） The principle of anti-radiation clothing Radiation-proof clothing is used to generate the induced current from the ring road of the metal fibers in the garment, and the reverse electromagnetic field is screened by the induced current. The origin of anti-radiation clothing The application of electromagnetic radiation shield clothing already have decades of history, the early radiation protection clothing for technology reason is relatively heavy, efficiency is low, the cost is high, is mainly engaged in radar, microwave communications department staff use. With advances in technology, it is now possible to make the garment as light and soft, soaking wet, washable, and the efficiency of electromagnetic shielding is greatly improved. Therefore, it is a convenient and effective means of self-preservation for the present level of technology. Anti-radiation uniform, dense metal mesh form in general a safe shield, can effectively block, refraction trace x-rays, ultraviolet radiation, low frequency radiation and microwave radiation, avoid the human body and the fetus. It is comfortable, dry, breathable, unstimulating, no side effects, and it has the characteristics of bacteriostatic, antistatic, washable and durable. The development history of anti-radiation clothing   the first generation of radiation protection clothing products adopts the spraying process, the metallic paint spraying on textile fabrics, forming sheet shielding layer, advantage is shielding effect is good, can reach more than 60 db, the radiation protection suits defect is airtight, cannot bend, relatively heavy, like a piece of sheet iron, can only be used as the lining, so this kind of radiation protection suits to use time is too long, easy to cause side effects ranging from skin irritation.   the second generation of radiation protection clothing with coating process, the metal particles adhesion between the warp/weft intersection of textile raw materials, the formation of dot shi