工作环境通用标准培训.pptVIP

* 1910.21(a)(1) 1910.23(a)(8) While the cover is not in place, the floor hole shall be constantly attended by someone or shall be protected by a standard railing with a standard toeboard. Every floor hole into which persons cannot accidentally walk (because of fixed machinery, equipment, or walls) shall be protected by a cover that leaves no openings more than 1 inch wide. The cover shall be securely held in place to prevent tools or materials from falling through. * 1910.23(b)(1) Guard using one of the following: rail, roller, picket fence, half door, or equivalent barrier. Where there is exposure below to falling materials, a removable toe board or the equivalent must also be provided. * 1910.23(c)(1) * 1910.23(c)(3) * 1910.23(d)(1) 1910.23(e)(2) * 1910.24 Applies to interior and exterior stairs around machinery, tanks and other equipment, and stairs leading to or from floors, platforms or pits. Does not apply to stairs used for fire exit purposes, to construction operations, to private residences, or to articulated stairs, such as those on floating roof tanks. Fixed industrial stairs are required for access to and from places of work where operations necessitate regular travel between levels. * 1910.27 All fixed ladders must be inspected regularly and be maintained in a safe condition. Preferred pitch in range of 75 to 90 degrees with horizontal. * 1910.27 All fixed ladders must be inspected regularly and be maintained in a safe condition. Preferred pitch in range of 75 to 90 degrees with horizontal. * 1910.28 Damaged or weakened scaffolds must not be used. A safe means must be provided to gain access to the working platform level through use of a ladder, ramp, etc. Never work on scaffolds during storms, high winds, ice, or snow. Always be aware of the hazards of overhead power lines when working on scaffolds. * * 出口 = 生路? 不要阻塞出口，出口是唯一的出路 不要把自己锁在室内 设置多个出口 出口一推即开 出口要有明显的标志 * ??????错在哪里? ???