ansys单元的特性(国外英文资料).doc

ansys单元的特性(国外英文资料) Carefully read the unit use restrictions and instructions. Mass21 is composed of 6 degrees of freedom point elements, x, y, Z linear displacement in three directions and around the X, y, Z axis rotation displacement. Each degree of freedom mass and moment of inertia are defined respectively. Link1 can be used in various engineering applications. According to the application need, can put this element as a truss, connecting rod, spring, etc.. The 2 dimensional bar element is a uniaxial tension compression element in each node has two degrees of freedom. X, y, direction. Is not the moment. Link8 can be used in different engineering rod. Can be used as a simulation framework, drop cable, connecting rod, spring etc.. 3 dimensional bar element is a uniaxial tension and compression elements. Each point has 3 degrees of freedom. X, y, Z direction. As a hinge structure, no moment. Has plasticity, creep, swelling, stress stiffening and large deformation characteristics. Link10 3 dimensional bar elements, has the characteristics of bilinear stiffness matrix, one-way axial tension (or compression) elements. The one-way axial tension, if the element becomes compressed, hardness is disappeared. This feature can be used for static in the cable, when the cable is modeled as an element. When the need for static capability but not static elements and elements of the initial input, can also be used in dynamic analysis. The element is the shell41 line, keyopt (1) =2, the cloth option. If the purpose of the analysis is to study the motion of the element, (no static elements), available with similar but not loose elements (such as link8 and pipe59) instead of. When the final structure is the time structure of a taut, Link10 also cannot be used as a static concentration analysis. But because of the end game at one point the relaxation conditions is possible. In this case, with other elements or use power technology in link10. Link10 each node has 3 degrees of freedom,