LGMazak编程教程(国外英文资料).doc

LGMazak编程教程(国外英文资料) LGMazak Small giant machine tool limited company qt-200 CNC lathe EIA/ISO programming training course One: training schedules EIA/ISO programming - two days: training content The first day of the EIA/ISO program The basic knowledge of EIA/ISO programming The description of the frame of the machine tool and the coordinate system of the workpiece: the description of the supplementary value and the establishment of the workpiece coordinate system: The description of the compensation of the knife: geometric compensation, wear and tear compensation workpiece coordinate system establishment: the G50 is established It is established through a knife-edge The instructions for calling an existing program and creating a new program: The composition of the EIA/ISO programming: auxiliary function code + G code The description of the modes of interconversion and standard mode: the parameters P16 bit 3 (1-1) Instructions for the use of the auxiliary function code The use of the M code is illustrated: auxiliary function instructions (other M codes refer to the M code table) M00: the program stops M01: the selector stops M02: program completion (13-55) M03: main shaft is turning M04: main shaft reverse M05: main shaft stops M08: cooling open M09: cooling off M30: return program header (13-55) M98: the call subroutine (13-48) M99: return to the main program (13-48) M198: the program finishes (13-55) M199: program finishes (13-55) The use of the command S code: the spindle speed setting S2 bits: shift instructions S4 / S5: the use of the actual spindle speed of the T code: Cutter number (MAZATROL tool data) tool number When Txx 00, the tool compensation is cancelled. 6/17/992:08:50pm - page 7 From: DocxLGMazak Small giant machine tool co., LTD 1.3 programming instruction format: The absolute value instruction and the incremental value instruction: X, Z/U, W (5-1) boot initial set to G90 English/metric switching instructions: the G20 / G21 (5-2) starts wit