叉车理论试卷 2(国外英文资料).docVIP

叉车理论试卷 2(国外英文资料) True or false 1: motor vehicles are widely used in dc generators and alternators. (to) 2: the public security bureaus nuclear license plate and the driving license will be allowed to drive in the factory district. (to) 3: the cylinder body is the base of the engine. (to) Piston pin with piston pin hole. (wrong) 5: the drive bridge drives the input of the transmission to the driving wheel. (to) The ZL type loader adopts articulated frame. (to) 7: the main function of hand brake is to enable the vehicle to park reliably in the position where it is parked and not to move, but to assist the brake when necessary. (to) The lifting lever of the forklift is the control element. (to) Battery car can be used 24-48 volt battery. (to) 10: the thermometer is used to indicate the temperature of the cooling water in the water jacket when the engine is running. (to) 11: before starting the engine, the brake should be tightened, and the gear will be put into neutral. (to) 12: when the vehicle is turning, the lateral rear wheel has a radius greater than the outside wheel, and their difference is called the inner wheel 13: no emergency brake and mid-shift can be used when the vehicle is on a long, steep incline. (to) 14: at the time of operation, there is a metal tapping, a leak, a carburetor, and the exhaust pipe, which indicates that the engine is abnormal. (to) 15: the common fault performance of motor vehicle brakes is heavy steering, rolling head and steering bias. (wrong) 16: the small side of the brake shoe is small between the brake and the brake. (to) The diesel pump plunger is interchangeable. (wrong) 18: the oil spray from the injector must be under certain pressure. (to) One engine has three oil filters. (to) 20: the piston of the four-stroke internal combustion engine moves a stroke in the cylinder, and the crankshaft rotates 180o. (to) Single topic selection The piston of petrol engine is mostly adopted (B). A. high cast iron B. Aluminum alloy C 22: dies