喷绘后期制作中的一些技巧(国外英文资料).docVIP

喷绘后期制作中的一些技巧(国外英文资料) Some skills in post production of inkjet printing Post production is an indispensable process in the printing industry, which plays an important role in the success or failure of the whole work and the quality guarantee. A quick and exquisite post production will not only make the work more icing on the cake, but also create greater economic and business reputation for the company. The concept of post production is extensive, and basically all of the design work is post production. Such as: output, cutting, laminating, mounting plate, splicing and so on. Below, do a little explanation to the later work. Output: the first work after the image design is finished is output. In this process, the output image must be merged with all layers (layer), usually stored in.Tif or.Jpg format, and if the image is made with an apple computer, the file must have an extension. For the image file point settings, basically kept at 100dpi up and down to achieve output accuracy, if you want to output the image of the surface is large, points can be properly reduced. This process has several points to note: first of all, printing is different from printing, the color of printing is much more beautiful than print. So you must set RGB mode in inkjet drawing, not CMYK mode. Map printing images are often large, some of the subtle flaws in print output will become obvious and exaggerated, which cannot pass through the sample to find, so the printing image must be amplified to 100% after carefully check again in the production. For a lot of text pictures, but also to carefully proofread. And because there is no ready-made color inkjet output, in the grasp of color depends on the experience, this is the purpose of the sample. Cut: after the output of the picture is finished, the machine will automatically cut the paper. For the size of the picture and paper is different, need to cut, cut neatly. When we cut the film, we also use scissors to walk along the marking line, bec