打印机百科全书(国外英文资料).docVIP

打印机百科全书(国外英文资料) Laser printer is a print and output device which integrates laser scanning technology, electronic technology, electrostatic imaging technology and so on. It has the characteristics of fast printing speed, good printing quality, high resolution, low noise and so on. It is an important computer peripheral. With the emergence of network printers, it has been widely used in office automation, printing, publishing, scientific research and other industries. Examples of maintenance failures Fault 1: a laser printer, the image is clearly black and white. After the toner cartridge is replaced and the parts are all clean, the fault still remains. Maintenance methods: by maintaining the optical part of the laser printer, the fault is solved, the main is to open the laser printer shell, open the black plastic box, with several reflective surface clean lens paper rub shuttle mirror, then several optical lens clean, the plastic box is removed by reduction, pay attention to the wiring card connector installed. After the boot, printed out of the handwriting is very full. Fault two: a Canon ST laser printer often fail to heat the light, after the boot, only one power light, the machine can not work properly. Maintenance methods: through inspection found that the problem is not the fuser, nor power, small relay, a power supply box next to the box but in a small 102J circuit board contact resistance and the heating pipe is not good, because the two sides are two sides of the circuit board, to use the electric iron welding, after welding troubleshooting. This fault is common in ST laser printers, but sometimes the heating light fails to power the control part of one way thyristor fault. Fixing lamp tube, thermistor and thermal protector are also common faults. If the fusing lamp is burned out and the thermistor is not good, the heat protector should be replaced with an open circuit. Fault three: a Canon BX II laser printer heating lamp sometimes light, sometimes not bri