施工技术1(国外英文资料).docVIP

施工技术1(国外英文资料) First, determine the problem (think of me your, in parentheses that wrong in parentheses x) 1., the thickness of the ash brick wall is generally 10mm, allowing thickness of 8 ~ 12mm. (V) 2. the masonry of masonry walls shall not be frozen during winter. (V) 3. commonly used tensile strength as a basis for classification of concrete strength. (X) 4. three a brick, mortar to full, felting, quality assurance, clean wall. (V) 5., in the end of the steel bar made of curved hook, can increase the skid resistance. (V) 6., more than six winds, heavy snow, fog weather should be suspended on the scaffolding work. (V) 7. fill compaction only consider the influence of compaction work. (X) 8. the steel bar is welded first and then cold drawn. (V) 9. cast in place concrete shall be covered and watered within 24 hours after pouring. (X) 10. rigid waterproof roof suitable for any geological condition of the building. (X) The 11. end bearing pile is a pile that sinks to a certain depth of soft soil. (X) 12. the natural water content of soil refers to the percentage of soil water quality to total mass (X) 13. piece installation means that the crane is installed in the workshop during the opening, and the section is installed with various types of components (X) 14. building waterproof mainly refers to the roof waterproof. (X) 15. waterproof according to the use of waterproof material is different, divided into flexible waterproof and rigid waterproof two major categories. (V) The 16. match method is suitable for making the long length of prestressed large tonnage of large and medium sized components. (X) 17. the greater the dry density is, the more dense the soil is. (V) 18. the slope of earthwork slope is the ratio of excavation depth to bottom width of slope. (V) 19. when the different kinds of soil are filled, the permeable soil layer is placed above the permeable soil layer. (X) 20. after cold drawing, the plasticity increases and the tensile strength increases. (X)