胶囊填充机原理(国外英文资料).docVIP

胶囊填充机原理(国外英文资料) P:1]NJP full automatic capsule filling machine equipment manual 1. overview Power supply: 380V, three-phase, four wire, 50HZ, 5.68KW Compressed air: 0.03m3/min, pressure 0.4MPa Working environment: 21 + 3, relative humidity: 40 ~ 60% Equipment manufacturer: Telephone： Website: Model NJP - 800 NJP - 1200 Maximum production capacity (grain / fraction) 8001200 Filling capsule type 00# - 5# 00# - 5# Capsule machine rate is greater than 99% Loading difference is less than 5% Total power (kW) 3.535 Power 380V, 50Hz Outline dimensions L*W*H (mm) 700*900*2100 970*800*2170 Weight (kg) 700900 1.1 structure and principle 1.2.1 structure The structure of fully automatic capsule filling machine is composed of empty capsule feeder, capsule dispensing device, powder feeding device, a metering disc mechanism, capsule filling sealing mechanism, the main drive mechanism and electric control system etc.. 1) empty capsule blanking device: it is composed of hopper and conveying pipe. It mainly stores empty capsules and makes empty capsules vertically and vertically into the capsule. 2) capsule dispensing device: the empty capsule into the dispenser device select fork, a fork sending downward movement will send six capsules, and the rubber cap. At the same time, the vacuum separation system enters the capsule into the module and separates the body cap. 3) powder blanking device: consists of powder bucket, powder bucket screw, blanking pipe, etc., mainly in the screw and mixing action, the storage powder has been controlled into the metering disk. 4) measuring disk mechanism: according to the specifications and the amount of matching the measuring plate specifications. Powder in the intermittent rotating measuring plate, after five times filling and compacting the medicine column, and push into the capsule of the lower module. 5) capsule filling and sealing mechanism: when the capsule body is pushed into the capsule capsule, the upper and lower rubber cap and the lower cap