扫路车技术知识合集(国外英语资料).docVIP

扫路车技术知识合集(国外英文资料) The function of the road car brake The function of the car brake in the car: to keep the dislodged sweeping vehicle in place. Its easy to start on the ramp; To use or cooperate with the brake when the brake fails. The car brake is divided into two types: central brake and wheel brake. The brakes of the former are installed in the rear of the transmission, and the braking torque is applied to the transmission shaft. The latter shares a brake assembly with the wheel brake, but the transmission mechanism is independent of each other. According to the characteristics of brake structure form, it can be divided into drum, plate, belt and spring action. Because of the drum brake can adopt high brake efficiency of the automatic power brake, with outer profile size small, easy to adjust and sediment control performance is good, so widely used. This section mainly introduces the function, composition, type and repair adjustment method of the car brake. The car brake is made up of the four parts The brake system includes four basic components of power supply, control device, actuator and brake. (1) sweep road car powered device: including the energy supply, adjust the brake and can improve the transmission medium of the state of the various components, which can produce part of the braking energy is called brake X, mans body can also be a braking energy. (2) floor sweeping vehicle control device: includes all kinds of parts, such as brake pedal, which produce braking action and control braking effect. (3) the sweeper transmission device: the drivers or other sources of power force to the brake and brake control work at the same time, to obtain required braking torque. Braking transmission device can be divided into mechanical, hydraulic, air-hydraulic type, vacuum hydraulic type, air pressure type, etc. (4) sweep brake: a component that produces forces that block movement or movement. The general brake is the friction brake, which is the brake torque created