LNG低温管道预冷及热应力分析.pdfVIP

Modeling and Simulation 建模与仿真, 2017, 6(1), 21-30 Published Online February 2017 in Hans. /journal/mos /10.12677/mos.2017.61003 Analysis on the Pre-Cooling and the Thermal Stress Distribution of the LNG Low-Temperature Pipe 1 2 1 1 3 Hongzhi Zhang , Xuanyu Sheng , Jing Huang , Junman Shu , Yachen Xu 1 Installation Company of Daqing Oilfield Engineering Construction Co., Ltd., Daqing Heilongjiang 2 Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 3 Research Center of Advanced Energy Equipment Technology, Tianjin Research Institute for Advanced Equipment, Tsinghua University, Tianjin nd th rd Received: Dec. 2 , 2016; accepted: Dec. 20 , 2016; published: Dec. 23 , 2016 Copyright © 2017 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract The pre-cooling of LNG low-temperature pipe is a difficult point of completion and commissioning of LNG project. Under the flow rate of 0.2 m/s, 0.5 m/s and 1 m/s, FLUENT software is used to con- duct simulation of BOG gas pre-cooling technology for Φ 630 × 10 mm low-temperature pipe to obtain temperature change regularity of pipe during BOG pre-cooling process and real-time dis- play of temperature of low-temperature pipe during pre-cooling process. The temperature data are extracted into ANSYS software to calculate the thermal-stress and to formulate the pre-cooling plan of the low temperature pipe. Keywords LNG Low-Temperature Pipe, Pre-Cooling